The iPV V200, powered by the YiHi SX531 chipset, runs on dual 18650 batteries with a wattage range of 5–200W. It’s powerful, yet simple to operate.

Power On & Basics

• Insert batteries: open magnetic door, place two 18650 cells correctly.
• Power on: press fire button 5 times quickly.
• Lock/Unlock: press fire button 3 times.

Wattage Adjustment

• On home screen, press Up button.
• Use Up/Down to set wattage (5–200W).
• Confirm with fire button.

Flavor Modes

• On home screen, press Down button.
• Choose from:
  • Normal: constant 100% power
  • Strong: starts ~150%, decreases to 100%
  • Soft: starts ~50%, increases to 100%
  • SXi-EQ 1–3: DIY curves, adjust power % every 0.5s (50–150%).

Puff Counter

• Track your puff count on screen.
• Hold Up + Fire button to reset.

Main Menu

Hold Up + Down buttons together:

• System Off: shut down
• Brightness: adjust screen brightness
• Exit: back to home

Common Notices

• No Atomizer: check or replace coil.
• Low Battery: recharge (voltage <3.2V).
• Low Resistance: coil <0.1Ω → replace.
• Short: output short detected.
• Max Power: reduce wattage.

Specs

• Wattage: 5–200W
• Battery: Dual 18650
• Size: 48 × 92.7 × 33.6 mm
• Max charging: 5V / 2A
• Chipset: YiHi SX531

Quick Summary

• Fire button for main actions, Up/Down for details
• Easy wattage adjustment
• Flavor modes: Normal / Soft / Strong / SXi-EQ custom curves
• Puff counter reset anytime
• Dual‑battery design for stable performance