The iPV V200 box mod is powered by the YiHi SX531 chipset. It supports dual 18650 batteries and delivers up to 200W output.

This guide explains how to use iPV V200, including wattage adjustment, flavor modes, and common vape settings.

What is iPV V200?

The iPV V200 vape mod is a high power box mod designed for stable performance and simple operation.

• Output range: 5W to 200W
• Powered by dual 18650 batteries
• Equipped with YiHi chip for accurate power control
• Suitable for sub-ohm tanks and rebuildable atomizers

How to Turn On iPV V200

• Insert two 18650 batteries correctly
• Press the fire button 5 times quickly to power on
• Press fire button 3 times to lock or unlock

Tip: Always use matched batteries for better safety and performance.

How to Adjust Wattage on iPV V200

• From home screen, press the Up button
• Use Up / Down buttons to change wattage
• Range: 5W to 200W
• Press fire button to confirm

This is also known as variable wattage mode, the most common vape setting.

iPV V200 Flavor Modes Explained

The iPV V200 includes different vape power curves to adjust your vaping experience.

• Normal mode
• Constant 100% power output
• Best for stable flavor

• Strong mode
• Starts around 150% power, then drops to 100%
• Faster heating, stronger throat hit

• Soft mode
• Starts around 50%, then increases to 100%
• Smoother inhale, good for beginners

• SXi-EQ modes (1–3)
• Custom power curves
• Adjust power every 0.5 seconds (50%–150%)
• Advanced users can fine-tune flavor

These modes are useful for users searching for:
• best vape settings for flavor
• how to customize vape power curve

Puff Counter – Track Your Usage

• Puff count is displayed on screen
• Hold Up + Fire button to reset

This helps monitor daily vaping usage.

Main Menu Navigation

Hold Up + Down buttons together:

• System Off – turn off device
• Brightness – adjust screen light
• Exit – return to home screen

Common Vape Errors and Fixes

Understanding these messages helps improve device use and SEO relevance for troubleshooting searches:

• No Atomizer
• Check tank connection or coil

• Low Battery
• Battery voltage below 3.2V
• Recharge batteries

• Low Resistance
• Coil resistance below 0.1Ω
• Replace coil

• Short
• Possible short circuit
• Check atomizer

• Max Power
• Wattage too high for coil
• Reduce wattage

These are common searches like:
• vape says no atomizer fix
• low resistance vape meaning

iPV V200 Specifications

• Wattage: 5W–200W
• Battery: Dual 18650
• Size: 48 × 92.7 × 33.6 mm
• Charging: 5V / 2A
• Chipset: YiHi SX531

Quick Summary – iPV V200

• Easy to use vape mod with simple controls
• Adjustable wattage for different vaping styles
• Multiple flavor modes for customization
• Puff counter included
• Dual battery for longer usage and stable output

For full specifications and product details, visit the official product page:
• SXmini official website – https://yihisxmini.com/product-detail.html?id=20